國立臺南大學教師基本資料

基本資料
姓名 李昆達
系所 材料科學系
職稱 副教授
校內分機 593
傳真 06-3017132
辦公室/研究室 格致樓四樓C410室
E-mail kundar@mail.nutn.edu.tw
網址 http://www.material.nutn.edu.tw/html/ms/teacher_item/personal/CPU/kundar.htm
專長/研究領域 材料科學
 

畢業學校國別主修學門學位修業期間
國立成功大學中華民國材料科學及工程學系大學1992~1996
國立成功大學中華民國材料科學及工程學系碩士1996~1998
國立成功大學中華民國材料科學及工程學系博士1998~2003

服務機關部門 / 系所職稱服務期間
國立成功大學材料科學及工程學系X-ray實驗室助教1998~2001
鑫科材料股份有限公司研發部工程師2000~2001
中國鋼鐵公司鋼鋁研發處煉鋼製程組(T12)工程師2003~2004
興國管理學院教務處課務組副組長2004/11~2006
興國管理學院資訊管理學系助理教授2004~2006
美國密西根大學材料科學與工程學系訪問研究科學家2006~2010
廈門大學能源研究院訪問學者2010/6~2010/7
國立台南大學材料科學系助理教授2010~2013
國立台南大學材料科學系副教授2013~

著作
名稱Kun-Dar Li, 1996, Calculation the equilibrium concentration of various reaction gases in CVD process based on thermodynamics, Bachelors thesis, National Cheng Kung University.
年度1996
類別專書
摘要
關鍵字
名稱Kun-Dar Li, 1998, Analyses on the Mechanism of Porosity Formation in Aluminum Alloys, Masters Dissertation, National Cheng Kung University.
年度1998
類別專書
摘要
關鍵字
名稱Kun-Dar Li, 2003, A Study on the Mechanism of Porosity Formation in Aluminum Alloy Castings, Ph.D. Dissertation, National Cheng Kung University.
年度2003
類別專書
摘要
關鍵字
名稱V.N. Kuzovkov*, E.A. Kotomin, G. Zvejnieks, K.D. Li*, T.H. Ding, L.M. Wang, Void superlattice formation in electron irradiated insulating materials, Advances in Materials Science Research, Volume 2, Chapter 11, pp. 191-216, (2011) Nova Science Publishers, Inc., ISBN 978-1-61728-162-4.
年度2011
類別專書
摘要
關鍵字
名稱Kun-Dar Li, Ming-Cheng Cheng and Edward Chang, "The Pressure Index of Porosity Formation for A356 Alloy Permanent Mold Castings with Variation of Hydrogen Contents in the Melt", AFS Transactions, vol. 109, p301-310 (2001).
年度2001
類別期刊論文
摘要
關鍵字
名稱Kun-Dar Li, Ming-Cheng Cheng and Edward Chang, "Effect of Pressure on the Feeding Behavior of A356 Alloy in Low-Pressure Casting", AFS Transactions, vol. 109, p311-320 (2001).
年度2001
類別期刊論文
摘要
關鍵字
名稱Kun-Dar Li, Ming-Cheng Cheng and Edward Chang, "Feeding Behavior of A356 Alloy by Low-Pressure Casting", Chukung, vol. 28, No. 1(No. 112), Mar., p33-39 (2002).
年度2002
類別期刊論文
摘要
關鍵字
名稱Kun-Dar Li and Edward Chang, "A Modified Mechanism of Porosity Formation in A356 Alloy Permanent Mold Castings", AFS Transactions, vol. 110, p331-338 (2002).
年度2002
類別期刊論文
摘要
關鍵字
名稱Kun-Dar Li and Edward Chang, "An Analysis on Porosity Formation in A356 Aluminum Alloy Castings", Int. J. Cast Metals Res., vol. 15, No. 1, p25-30 (2002).
年度2002
類別期刊論文
摘要
關鍵字
名稱Kun-Dar Li and Edward Chang, "A Mechanism of Porosity Distribution in A356 Aluminum Alloy Castings", Materials Transactions, vol. 43, No. 7, p1711-1715 (2002).
年度2002
類別期刊論文
摘要
關鍵字
名稱Kun-Dar Li and Edward Chang, "Explanation of the Porosity Distribution in A206 Aluminum Alloy Castings", AFS Transactions, vol. 111, 03-108 (2003).
年度2003
類別期刊論文
摘要
關鍵字
名稱Kun-Dar Li and Edward Chang, "A Study on Porosity Distribution of A356 Aluminum Alloy Castings", Journal of Taiwan Foundry Society, vol. 29, No. 1(No. 116), Mar., p72-79 (2003).
年度2003
類別期刊論文
摘要
關鍵字
名稱Kun-Dar Li and Edward Chang, "Mechanism of nucleation and growth of hydrogen porosity in solidifying A356 aluminum alloy: an analytical solution", Acta Materialia, vol. 52, p219-231 (2004).
年度2004
類別期刊論文
摘要
關鍵字
名稱Kun-Dar Li, Haiyan Xaio, Lumin Wang, Computer simulation study of defect formation and migration energy in Calcium fluoride, Nuclear Instruments and Methods in Physics Research B, 266, p2698 (2008). (SCI)
年度2008
類別期刊論文
摘要
關鍵字
名稱Qiangmin Wei, Kun-Dar Li, Jie Lian, Lumin Wang, Angular dependence of sputtering yield of amorphous and polycrystalline materials, J. Phys. D: Appl. Phys., 41, 172002 (2008). (SCI)
年度2008
類別期刊論文
摘要
關鍵字
名稱Kun-Dar Li, Alejandro Perez-Bergquist, Lumin Wang, Computer simulation of radiation-induced nanostructure formation in amorphous materials, Nuclear Instruments and Methods in Physics Research B, 267, p3063 (2009). (SCI)
年度2009
類別期刊論文
摘要
關鍵字
名稱Qiangmin Wei, Michaela Eddy, Kun-Dar Li, Lumin Wang, Influence of surface morphology on sputtering yields, J. Phys. D: Appl. Phys., 42, 165304 (2009). (SCI)
年度2009
類別期刊論文
摘要
關鍵字
名稱Qiangmin Wei, Xiuli Zhou, Bhuwan Joshi, Yanbin Chen, Kun-Dar Li, Qihuo Wei, Kai Sun, and Lumin Wang, Self-Assembly of Ordered Semiconductor Nanoholes by Ion Beam Sputtering, Advanced Materials, 21, p1-4 (2009). (SCI)
年度2009
類別期刊論文
摘要
關鍵字
名稱Alejandro Perez-Bergquist, Kun-Dar Li, Yanwen Zhang, Lumin Wang, Ion irradiation-induced bimodal surface morphology changes in InSb, Nanotechnology, 21, 325602 (2010).(SCI)
年度2010
類別期刊論文
摘要
關鍵字
名稱Kun-Dar Li, Alejandro Perez-Bergquist, Qiangmin Wei, Lumin Wang, Wei Lu, Energy-dependant irradiation-induced nanostructure formation in amorphous germanium, Journal of Computational and Theoretical Nanoscience, 7(3), p522 (2010).(SCI)
年度2010
類別期刊論文
摘要
關鍵字
名稱V.N. Kuzovkov, E.A. Kotomin, P. Merzlyakov, G. Zvejnieks, K.D. Li, T.H. Ding, L.M. Wang, Void superlattice formation in electron irradiated CaF2: Theoretical analysis, Nuclear Instruments and Methods in Physics Research B, 268, p3055 (2010). (SCI)
年度2010
類別期刊論文
摘要
關鍵字
名稱Kun-Dar Li, Modeling of nanocluster formation by ion beam implantation, Journal of Applied Physics, 110, 044318(2011). (SCI)
年度2011
類別期刊論文
摘要
關鍵字
名稱Lay Gaik Teoh, Kun-Dar Li*, Yi Hsuan Liu, Synthesis and characterization of Ni/NiO core-shell nanoparticles prepared by surfactant-mediated method, Nanoscience and Nanotechnology Letters,3 (2011) 1263.(SCI)
年度2011
類別期刊論文
摘要In this study, the Ni/NiO core-shell nanoparticles were prepared by surfactant-mediated method. The synthesis was accomplished by using triblock copolymer as the surfactant, and Ni(NO3)2.6H2O as the inorganic precursor. TGA, XRD, SEM, TEM and N2 adsorption-desorption isotherms were used to characterize the microstructure and specific surface area of the samples. The effect of the calcination temperature and the additive of Cu2O on the microstructure of Ni/NiO core-shell nanoparticles are also investigated in this study. TGA and FTIR analyses demonstrated that copolymers were expelled at 300°C. The sample calcined at 350°C was composed of only metallic Ni nanoparticles shown by XRD. As the calcining temperature was increased, metallic Ni coated with NiO formed. The formation of Ni/NiO core-shell nanoparticles was clearly confirmed by XRD and TEM analyses. The specific surface area evaluated from the N2 adsorption-desorption indicated that the samples consisted of non-porous Ni/NiO nanoparticles. Increasing the additive of Cu2O resulted in a decrease in the crystallinity of Ni formation. The present investigations prove the surfactant-mediated method is valuable for the preparation of Ni/NiO core-shell nanoparticles.
關鍵字
名稱Kun-Dar Li, Dynamics of Nanodots Formation on Irradiated Materials, Proceedings of the Institution of Mechanical Engineers, Part N, Journal of Nanoengineering and Nanosystems, vol. 226, p69-74 (2012).(EI) (NSC100-2221-E-024-004)
年度2012
類別期刊論文
摘要In this study, a theoretical model was developed to investigate the mechanism of self-organized nanodots formation fabricated by ion-beam irradiation. The radiation effects were combined into the theoretical model with vacancy diffusion for a reduction of free energy of mixing and interfacial energy. The influences of dose rate, material properties, and temperature on vacancy production and elimination rates during irradiation were all taken into consideration in the numerical calculations. Incorporated with Monte-Carlo TRIM calculation for the distribution profile of vacancy production rate, the dynamic evolutions of self-organized nanodots with a uniform size on an irradiated surface were fully illustrated by this model. Varied with the experimental conditions, the morphologies and length scales of our calculations are in a good agreement with many experimental observations in the literatures. This theoretical model gives an insight into the mechanism of self-organized pattern formation on irradiated materials through ion-beam technology.
關鍵字
名稱Kun-Dar Li, Qiangmin Wei, Lumin Wang, Wei Lu, Dynamics of Nanoscale Void/Fiber Assembly Formation in Irradiated Amorphous Materials, International Journal for Multiscale Computational Engineering, vol. 10 (1), p109-116 (2012). (SCI)
年度2012
類別期刊論文
摘要
關鍵字
名稱Lay Gaik Teoh, Kun-Dar Li*, Synthesis and characterization of NiO nanoparticles by sol-gel method, Materials Transactions, 53 (12), (2012). (SCI)
年度2012
類別期刊論文
摘要Due to the outstanding electrical, magnetic and catalytic properties, nickel oxide (NiO) has been received considerable attention during the past decades. In this study, NiO nanoparticles were prepared by sol-gel method, which is one of the simplest and lowest-cost techniques. The synthesis was accomplished by using Poly (alkylene oxide) block copolymer as the surfactant, and Ni(NO3)26H2O as the inorganic precursor. The effect of experimental parameters, such as calcination temperatures and H2O concentration on the NiO nanoparticles formation were investigated. TGA, XRD, SEM, TEM and N2 adsorption-desorption isotherms were used to characterize the microstructure and specific surface area of the samples. TGA and FTIR analyses demonstrated that copolymers were expelled at 573K. The formation of NiO nanoparticles and their structural features were greatly dependent on the calcination temperature. The sample calcined at 923K was composed of pure NiO nanoparticles as shown by XRD. As H2O concentration was increased, the reoxidation process of metallic Ni to form NiO would reduce, but it would not affect the structural type of NiO nanoparticles. In general, the addition of water would weaken and inhibit oxidation effects. The temperature of stable metallic Ni was increased up to 823K. The specific surface area evaluated from the N2 adsorption-desorption indicated that the samples consisting of non-porous NiO nanoparticles. Increasing H2O addition resulted in an increase of specific surface area of nanocrystalline NiO powder.
關鍵字NiO nanoparticles, sol-gel method, block copolymer, H2O addition
名稱Kun-Dar Li*, Three-Dimensional Modeling of Embedded Nanoparticles Formation by Ion Beam Implantation, Journal of Computational and Theoretical Nanoscience, 10(3),(2013) (SCI)
年度2013
類別期刊論文
摘要A three-dimensional model was developed to investigate the formation of embedded nanoparticles by ion beam implantation. The dynamical nucleation and growth process, including well-known Ostwald ripening, were successfully reconstructed by a theoretical model. Considering various Gaussian distribution profiles of implanted ions for different conditions, the effects of implanted ion mass, fluence, ion flux and temperature on the morphology of nanostructures were also revealed. According to the numerical calculations, no precipitates or particles formed in the early stage of implantation due to the low ion fluence and insufficient time for ion diffusion. With increasing ion fluence, immiscible impurity atoms started to segregate as dispersed nanoparticles. For a very high ion fluence, the implantation-induced nanostructure with a buried layer of implanted atoms developed. These simulation results were fully consistent with many experimental observations. This theoretical model gives a remarkable insight into the formation mechanism, and makes it possible to totally control and optimize the nanostructure through ion-implantation technology.
關鍵字
名稱Kun-Dar Li*, Modeling of Feature Profile Evolution for Ion Etching, Journal of Applied Physics, 113, 014305 (2013) (SCI)
年度2013
類別期刊論文
摘要A kinetic model is presented to investigate the profile evolution during ion etching. The effects of ion sputtering, redeposition, and diffusion processes are all taken into consideration in the formation mechanism of surface profile. The dominant factors accounting for the surface smoothening and roughening during ion etching are well explained in this study. Under high ion flux or ion energy, the sputtering effect plays a controlling role in roughening the surface profile with a high etching rate. While decreasing ion flux or ion energy, the surface profile is smoothened by the diffusion mechanism with a long time ion irradiation. For a low temperature, the characteristic length of nanostructures decreases with a sputtered feature profile due to the low mobility. Our simulation results are consistent well with many experimental observations. This theoretical model provides an efficient numerical approach to fully understand the mechanism for the formation of surface profile allowing for designing of appropriate experiments to form specific nanostructures through ion-beam technology.
關鍵字
名稱Synthesis and Characterization of Mesoporous SiO2-CaO-P2O5 Bioactive Glass by Sol-Gel Process
年度2013
類別期刊論文
摘要Ordered mesoporous SiO2-CaO-P2O5 bioactive glass with a highly specific surface area has been synthesized through a sol-gel process in the presence of a nonionic triblock copolymer acting as a template. The amorphous silicate can be detected on the mesoporous SiO2-CaO-P2O5 bioactive glass. The mesoporous SiO2-CaO-P2O5 bioactive glass exhibits the type IV isotherm curve with average pore size of 5.3nm and high specific surface area of 317.24m2/g for calcination at 600°C. Owing to the high specific surface area and pore volume, the mesoporous SiO2-CaO-P2O5 had a significantly enhanced bone-forming bioactivity compared with the conventional bioactive glass. After soaking the mesoporous SiO2-CaO-P2O5 in simulated body fluid (SBF) for 10 h, it can be observed that the formation of apatite nanocrystals occurs on the surface of the bioactive glass. It is anticipated that mesoporous SiO2-CaO-P2O5 with a controlled mesostructure may be potentially useful as novel tissue engineering scaffolds in bone regeneration.
關鍵字
名稱Synthesis, Structural and Optical Characterization of Sol–Gel-Derived Y-Doped Mesoporous CeO2
年度2013
類別期刊論文
摘要Highly crystalline and thermally stable undoped CeO2 and Y-doped mesoporous CeO2 particles have been synthesized from cerium(III) nitrate hexahydrate [Ce(NO3)3.6H2O] by the sol–gel method. Mesoporous CeO2 doped with 2 mol.% Y2O3 and calcined at 500C possesses specific surface area of 130.39 m2/g and retains a surface area of 91.84 m2/g at 600C. In comparison, undoped calcined materials have smaller specific surface areas of 43.23 m2/g and 20.24 m2/g at 500C and 600C, respectively. Results from x-ray diffraction (XRD) analysis, Raman spectroscopy, and selected-area electron diffraction (SAED) analysis indicated that the synthesized undoped CeO2 and Y-doped mesoporous CeO2 have the fluorite structure of bulk CeO2. The crystallite size of CeO2 is also considerably reduced by doping. The optical bandgap was found to be 3.24 eV for the undoped and 3.36 eV for the doped samples with calcination at 600C. These results suggest that there are potential applications of Y-doped mesoporous CeO2 with nanocrystals in the design of photocatalysts and optical devices.
關鍵字
名稱Kun-Dar Li*, Three-Dimensional Topography Evolution Algorithm for Ion Beam Etching Process
年度2014
類別期刊論文
摘要Ion etching is one of most common and essential process in modern semiconductor industry. In order to get a better understanding of etching mechanism and provide optimization guidance for manufacturing process, a three-dimensional topography evolution model based on the phase field method is presented to investigate the effects on surface profile formation during ion beam etching process. Integrating with the Monte-Carlo TRIM calculations for different conditions of ion irradiation, the influences of sputtering, redeposition, etching rate and diffusion processes are all taken into consideration to compose a kinetic model for ion etching process. Various surface morphologies with ripple-like, pillar-like and pit-like profiles are formed under different numerical parameters, which are corresponded to various processing conditions. While the sputtering effect plays a dominant factor in the formation mechanism, a roughening topography would be developed, such as the conditions of high ion flux or high ion energy. By decreasing ion flux or increasing temperature, the diffusion process becomes a controlling factor, and it causes a smoothening surface profile. Quantitative analyses of surface roughness for numerical calculations are also examined for the comparison with the experimental observations in the literatures. This theoretical model provides a simple and efficient numerical approach to comprehend the mechanism of topography evolution during ion etching.
關鍵字phase field model, ion etching, topography evolution, surface morphology
名稱Kun-Dar Li*, Modeling the effects of ion dose and crystallographic symmetry on the morphological evolution of embedded precipitates under thermal annealing
年度2014
類別期刊論文
摘要Thermal annealing is one of the most common techniques to synthesize embedded precipitates by ion implantation process. In this study, an anisotropic phase field model is presented to investigate the effects of ion dose and crystallographic symmetry on the morphological formation and evolution of embedded precipitates during post-implantation thermal annealing process. This theoretical model provides an efficient numerical approach to understand the phenomenon of faceted precipitates formation by ion implantation. As a theoretical analysis, the interfacial energy and diffusion kinetics play prominent roles in the mechanism of atomic diffusion for the precipitates formation. With a low ion dose, faceted precipitates are developed by virtue of the anisotropic interfacial energy. As an increase of ion dose, connected precipitates with crystallographic characters on the edge are appeared. For a high ion dose, labyrinth-like nanostructures of precipitates are produced and the characteristic morphology of crystallographic symmetry becomes faint. These simulation results for the morphological evolutions of embedded precipitates by ion implantation are corresponded with many experimental observations in the literatures. The quantitative analyses of the simulations are also well described the consequence of precipitates formation under different conditions.
關鍵字anisotropic phase field, ion implantation, faceted precipitates, thermal annealing
名稱Kinetics modeling of precipitation with characteristic shape during post-implantation annealing
年度2015
類別期刊論文
摘要In this study, we investigated the precipitation with characteristic shape in the microstructure during post-implantation annealing via a theoretical modeling approach. The processes of precipitates formation and evolution during phase separation were based on a nucleation and growth mechanism of atomic diffusion. Different stages of the precipitation, including the nucleation, growth and coalescence, were distinctly revealed in the numerical simulations. In addition, the influences of ion dose, temperature and crystallographic symmetry on the processes of faceted precipitation were also demonstrated. To comprehend the kinetic mechanism, the simulation results were further analyzed quantitatively by the Kolmogorov-Johnson-Mehl-Avrami (KJMA) equation. The Avrami exponents obtained from the regression curves varied from 1.47 to 0.52 for different conditions. With the increase of ion dose and temperature, the nucleation and growth of precipitations were expedited in accordance with the shortened incubation time and the raised coefficient of growth rate. A miscellaneous shape of precipitates in various crystallographic symmetry systems could be simulated through this anisotropic model. From the analyses of the kinetics, more fundamental information about the nucleation and growth mechanism of faceted precipitation during post-implantation annealing was acquired for future application.
關鍵字
名稱Characterization of the nucleation and growth of nanoparticles by post-implantation annealing
年度2015
類別期刊論文
摘要奈米粒子擁有獨特的化學與物理特性,被廣泛地應用在各領域之中。本研究以相場法(Phase Field Method)所建立之理論模型與數值模擬方法,可探討經離子佈植後的退火過程,基材中等向性奈米粒 子的形成與演化機制,其中包含奈米粒子隨時間增加其析出相變之成核、成長與奧氏熟化(Ostwald ripening)的過程。結合Monte Carlo TRIM 離子佈植的模擬計算,分析不同製程條件參數下,如佈植離 子劑量、離子能量和退火製程溫度等,對奈米粒子微觀結構之演化與成核成長動力學特性的影響。本 理論模型提供不同佈植參數和材料特性的模擬結果,預測經佈植後退火奈米粒子之成核成長與演化 特性。可用以發展具特殊形貌與應用價值之奈米結構材料,增加佈植退火製程在奈米技術中的應用 性。
關鍵字佈植後退火、奈米粒子、相場理論、成核成長動力學
名稱Dynamics of Faceted Nanoparticles Formation in a Crystalline Matrix During Ion Implantation Processing
年度2016
類別期刊論文
摘要The faceted nanoparticle synthesized by ion implantation, such as Zn, Cu or Ag nanoparticles, is one of the promising materials for the next generation of optical devices. To understand and better control the manufacturing processes of ion implantation, a theoretical model is applied to investigate the formation and evolution of faceted nanoparticles under various experimental conditions of implantation processing. In this study, the mechanisms of the anisotropic interfacial energy and kinetics with different ion distributions are taken into consideration to demonstrate the role of the crystallographic symmetry, ion energy and temperature on the faceted nanoparticles formation in a crystalline matrix. As presented in the numerical results, the morphological shape of the nanoparticles is mainly affected by the crystallographic symmetry, while the distribution of the precipitates is principally determined by the ion energy. For the condition of high-temperature implantation, a high mobility of ions causes the characteristic length of nanostructures to increase and creates a coarsening morphology of nanoparticles. It is attributed to a longer diffusion distance during the nucleation and growth processes. This model can be widely used for the predictions of the nanostructures formation with various ion implantation processes.
關鍵字
名稱Numerical Study on the Dependence of Surface Topography with Sputter Etching Process
年度2016
類別期刊論文
摘要Concentrating on the irradiation effects and diffusion kinetics, a three-dimensional anisotropic phase field model was derived to simulate the topographical formation and evolution in a crystalline matrix during sputtering etching. The development of surface morphology via a self-organization process in the kinetic model was deliberated upon by the physical mechanisms, such as ion sputtering, redeposition and vacancy diffusion. The characteristic surface profiles were critically affected by the anisotropic interfacial energy and mobility, resulting from the crystallographic symmetry in a crystalline matrix. Regarding to the differences of processing conditions, a variety of surface structures was established numerically, including nano-ripples, nano-pyramids, nano-pillars and nano-walls. These distinctive surface morphologies evolved continuingly with the etching time. Furthermore, the influences of sputtering parameters on the erosion rate and surface roughness during ion etching were also demonstrated quantitatively in this study. These simulation results not only matched well with many experimental observations, but also provided a good guidance for creating featured morphologies with sputtering technique.
關鍵字Anisotropic Kinetic Model; Sputter Etching; Crystalline Matrix; Characteristic Morphology
名稱Kun-Dar Li, Ming-Cheng Cheng and Edward Chang: Effect of Pressure on the Feeding Behavior of A356 Alloy in Low-Pressure Casting, AFS 105th Casting Congress, Dallas, Texas, April 28-May 1, 2001.
年度2001
類別研討會
摘要
關鍵字
名稱Kun-Dar Li, Ming-Cheng Cheng and Edward Chang: Feeding Behavior of A356 Alloy by Low-Pressure Casting, The 2001 Annual Conference of Chinese Foundrymens Association, National Taiwan Normal University, Taipei, Dec. 8, 2001.
年度2001
類別研討會
摘要
關鍵字
名稱Kun-Dar Li, Ming-Cheng Cheng and Edward Chang: Porosity Formation for A356 Alloy Castings with Variation of Hydrogen Contents in the Melt, The 2001 Annual Conference of the Chinese Society for Materials Science, National Chung Hsing University, Taichung, Nov. 23-24, 2001.
年度2001
類別研討會
摘要
關鍵字
名稱Chung-Yuo Lee, Kun-Dar Li and Edward Chang: Porosity Formation in A356 Alloy Castings, The 2002 Annual Conference of the Chinese Society for Materials Science, National Taiwan University, Taipei, Nov. 22-23, 2002.
年度2002
類別研討會
摘要
關鍵字
名稱Kun-Dar Li and Edward Chang: A Study on Porosity Distribution of A356 Aluminum Alloy Castings, The 2002 Annual Conference of Chinese Foundrymens Association, I-Shou University, Kaohsiung County, Nov. 30, 2002.
年度2002
類別研討會
摘要
關鍵字
名稱Kun-Dar Li and Edward Chang: A Modified Mechanism of Porosity Formation in A356 Alloy Permanent Mold Castings, AFS 106th Casting Congress, Kansas City, MO, May 4-7, 2002.
年度2002
類別研討會
摘要
關鍵字
名稱Kun-Dar Li and Edward Chang: Explanation of the Porosity Distribution in A206 Aluminum Alloy Castings, AFS 107th Casting Congress, Milwaukee, WI, April 26-29, 2003.
年度2003
類別研討會
摘要
關鍵字
名稱Kun-Dar Li and Bang-Yen Chou: A Kinetic Mechanism of Porosity Formation in Aluminum Casting, The 2005 Annual Conference of the Chinese Society for Materials Science, Tam-Kang University, Taipei, Nov. 25-26, 2005.
年度2005
類別研討會
摘要
關鍵字
名稱Kun-Dar Li, Bang-Yen Chou, Shi-Wei Wang, Computer simulation and the stress analysis of screw in plastic injection process, 2007 MRS-T Annual Meeting, National Chiao Tung University, Taiwan, Nov. 16 - 17, 2007.
年度2007
類別研討會
摘要
關鍵字
名稱Kun-Dar Li, Wei Lu, Lumin Wang, Dynamics of irradiation-induced nano-fiber formation in germanium, 2007 MRS Fall Meeting, Boston, MA, November 26 - 30, 2007.
年度2007
類別研討會
摘要
關鍵字
名稱Weixing Li, Kun-Dar Li, Kai Sun, Rod Ewing, Lumin Wang, A model for fission track formation in fluorapatite considering radiation induced decomposition, 2007 MRS Fall Meeting, Boston, MA, November 26 - 30, 2007.
年度2007
類別研討會
摘要
關鍵字
名稱Kun-Dar Li, Haiyan Xaio, Lumin Wang, Computer simulation study of the defect and threshold displacement energy in calcium fluoride, the 14th International Conference on Radiation Effects in Insulators, Caen, France, August 28-September 1, 2007.
年度2007
類別研討會
摘要
關鍵字
名稱Lumin Wang, Weixing Li, Kai Sun, Kun-Dar Li, Jie Lian, Rodney Ewing, Study of the nature and annealing behavior of fission tracks in natural apatite, the 14th International Conference on Radiation Effects in Insulators, Caen, France, August 28-September 1, 2007.
年度2007
類別研討會
摘要
關鍵字
名稱Kun-Dar Li, Alejandro Perez-Bergquist, Qiangmin Wei, Lumin Wang, Modeling of effects of ion energy and mass on self-organized nanostructure formation during ion-beam implantation, 2008 MRS Fall Meeting, Boston, MA, December 1 - 5, 2008.
年度2008
類別研討會
摘要
關鍵字
名稱Kun-Dar Li, Qiangmin Wei, Lumin Wang, Modeling of self-organized pattern formation on semiconductor surfaces under ion sputtering, 2008 MRS Fall Meeting, Boston, MA, December 1 - 5, 2008.
年度2008
類別研討會
摘要
關鍵字
名稱Kun-Dar Li, Lumin Wang, Computer simulation of radiation induced cavity and nanostructure formation in amorphous materials, The 9th International Conference on Computer Simulation of Radiation Effects in Solids, Beijing, China, October 12 – 17, 2008.
年度2008
類別研討會
摘要
關鍵字
名稱Lumin Wang, Q. Wei, A. Perez-Bergquist, X. Xiang, W. X. Li, K. D. Li, Y. W. Zhang, V. Skuratov, Ion Beam Processing of Nanostructures: From KeV to GeV in Ion Energy, TMS 2008 the 137th Annual Meeting & Exhibition, New Orleans, Louisiana, March 9-13, 2008.
年度2008
類別研討會
摘要
關鍵字
名稱Kun-Dar Li, Bang-Yen Chou, Shi-Wei Wang, Modeling of the Effects of Stress-Strain Distribution in Plastic Injection Process, 2008 MRS-T Annual Meeting, National Taipei University of Technology, Taiwan, Nov. 21 - 22, 2008.
年度2008
類別研討會
摘要
關鍵字
名稱Kun-Dar Li, Efrain Hernandez-Rivera, Bang-Yen Chou, Finite Element Method Simulation of Nano-Dots Formation under Ion Beam Modification: Ion Flux and Sputtering Case, 2009 MRS-T Annual Meeting, National Dong Hwa University, Taiwan, Nov. 26 – 28, 2009.
年度2009
類別研討會
摘要
關鍵字
名稱Kun-Dar Li, Weixing Li, Lumin Wang, Rodney C. Ewing, Eugene A. Kotomin, Dynamics of Microstructural Evolution in Electron-Irradiated Fluor-Apatite, REI-15 (Radiation Effects in Insulators), Padova, Italy, Aug. 30- Sept. 4, 2009.
年度2009
類別研討會
摘要
關鍵字
名稱E.A. Kotomin, V.N. Kuzovkov, G.Zvejnieks, K.-D. Li, L.M. Wang, Void Superlattice Formation In Electron Irradiated CaF2: Theoretical Analysis, REI-15 (Radiation Effects in Insulators), Padova, Italy, Aug. 30- Sept. 4, 2009.
年度2009
類別研討會
摘要
關鍵字
名稱Kun-Dar Li, Lumin Wang, Bang-Yen Chou, Computer simulation of irradiation-induced nanostructure formation, 2010 MRS-T Annual Meeting, I-Shou University, Kaohsiung County, Nov. 19-20, 2010.
年度2010
類別研討會
摘要
關鍵字
名稱Lay Gaik Teoh, Kun-Dar Li*, Yi Hsuan Liu, Effect of Cu2O on the Formation of Ni/NiO Core-Shell Nanoparticles, 2011 The International Conference on Green Technologies, National Pingtung University of Science and Technology, Pingtung, Taiwan, October 12~15, 2011.
年度2011
類別研討會
摘要
關鍵字
名稱Kun-Dar Li*, Modeling of surface pattern induced by ion sputtering, 2011 The International Conference on Green Technologies, National Pingtung University of Science and Technology, Pingtung, Taiwan, October 12~15, 2011. (NSC100-2221-E-024-004)
年度2011
類別研討會
摘要
關鍵字
名稱James Yang, Shang-Chuan Kuo, Kun-Dar Li*, Yan-Li Jiang, Numerical Simulation On The Irradiated-Induced Nano-Structure For Different Ion Energy/Mass, 2011 International Symposium On Nano Science And Technology, Southern Taiwan University, Tainan, Taiwan, Nov. 18-19, 2011. (NSC100-2221-E-024-004)
年度2011
類別研討會
摘要
關鍵字
名稱Shang-Chuan Kuo, James Yang, Yan-Li Jiang, Kun-Dar Li*, The Effect Of Temperature On The Radiation-Induced Nanostructure Formation: A Model Study, 2011 International Symposium On Nano Science And Technology, Southern Taiwan University, Tainan, Taiwan, Nov. 18-19, 2011. (NSC100-2221-E-024-004)
年度2011
類別研討會
摘要
關鍵字
名稱Kun-Dar Li*, Dynamics of nanodot formation in irradiated materials, 2011 International Symposium On Nano Science And Technology, Southern Taiwan University, Tainan, Taiwan, Nov. 18-19, 2011. (NSC100-2221-E-024-004)
年度2011
類別研討會
摘要
關鍵字
名稱Kun-Dar Li, Computer simulation of nanocluster formation by ion beam implantation, IUMRS-ICA 2011, 12th International Conference in Asia & 2011 MRS-T Annual Meeting, Taipei World Trade Center Nangang Exhibition Hall, Sept. 19-21, 2011.
年度2011
類別研討會
摘要
關鍵字
名稱Lay Gaik Teoh, Kun-Dar Li*, Yi Hsuan Liu, Preparation and properties of Ni/NiO core-shell nanoparticles with a surfactant-mediated method, IUMRS-ICA 2011, 12th International Conference in Asia & 2011 MRS-T Annual Meeting, Taipei World Trade Center Nangang Exhibition Hall, Sept. 19-21, 2011.
年度2011
類別研討會
摘要
關鍵字
名稱Kun-Dar Li*, A theoretical study of embedded nanoparticles formation by ion irradiation, 2012 MRS Spring Meeting, San Francisco, CA, April 9-13, 2012. (NSC100-2221-E-024-004)
年度2012
類別研討會
摘要
關鍵字
名稱Shang-Chuan Kuo, James Yang, Kun-Dar Li*, Modeling of nano-fibers and nano-porous layer formation in an amorphous materials: a cross-section view, 2012 MRS Spring Meeting, San Francisco, CA, April 9-13, 2012. (NSC100-2221-E-024-004)
年度2012
類別研討會
摘要
關鍵字
名稱Jin-Chian Yang, Chung-Jen Chung, Kun-Dar Li, Study on surface morphology of germanium by focus ion beam irradiation, 2012 International Symposium on Nano Science and Technology, Southern Taiwan University, 8-9 November 2012
年度2012
類別研討會
摘要
關鍵字
名稱Kwanyu Chen, Zhoug-Long Chung, Kun-Dar Li, Modeling of nanoparticle formation by thermal annealing process, 2012 International Symposium on Nano Science and Technology, Southern Taiwan University, 8-9 November 2012
年度2012
類別研討會
摘要
關鍵字
名稱Yan-Li Jiang, Kun-Dar Li, Chung-Chi Jen, Wen-Hao Yuan, Bang-Yen Chou, The influence of calcination temperature on phase transformation of In2Se3, 2012 International Symposium on Nano Science and Technology, Southern Taiwan University, 8-9 November 2012
年度2012
類別研討會
摘要
關鍵字
名稱Zhong-Long Chang, Shun-Kai Hsu, Shu-Jui Chang, Kun-Dar Li, Quantitative Analysis On Nanostructures Of Ion Beam Process, 2012 International Symposium on Nano Science and Technology, Southern Taiwan University, 8-9 November 2012
年度2012
類別研討會
摘要
關鍵字
名稱游瑞坤, 李昆達, 5083鋁胚均質後表面熔析黑色點狀物改善, 中國鋼鐵股份有限公司鋼鋁研發處報告, 2003.12
年度2003
類別技術報告
摘要
關鍵字
名稱李昆達, 鋁熔鑄生產設備製程現場實習, 中國鋼鐵股份有限公司鋼鋁研發處報告, 2003.11
年度2003
類別技術報告
摘要
關鍵字
名稱周倉榮, 李昆達等, 鋁熔鑄未來三年短、中程研發工作規劃, 中國鋼鐵股份有限公司鋼鋁研發處報告, 2003.10
年度2003
類別技術報告
摘要
關鍵字
名稱李昆達, 鋁合金DC澆鑄製程水模設備建立, 中國鋼鐵股份有限公司鋼鋁研發處報告, 2004.09
年度2004
類別技術報告
摘要
關鍵字
名稱李昆達, 石漢正, 5182鋁胚頭端熱軋開口裂成因之分析及改善, 中國鋼鐵股份有限公司鋼鋁研發處報告, 2004.07
年度2004
類別技術報告
摘要
關鍵字
名稱李昆達, 以電腦影像分析技術輔助PoDFA評量鋁湯介在物, 中國鋼鐵股份有限公司鋼鋁研發處報告, 2004.03
年度2004
類別技術報告
摘要
關鍵字
名稱李昆達, 鋁合金鑄造孔洞形成之動力學模式研究, 國科會研究計畫報告, 2005.07
年度2005
類別技術報告
摘要
關鍵字