國立臺南大學教師基本資料

基本資料
姓名 黃崇能
系所 機電系統工程研究所
職稱 教授
校內分機 7615
傳真 (06)2602116
辦公室/研究室 榮譽校區C棟3樓
E-mail kosono@mail.nutn.edu.tw
網址 http://140.133.2.10/~kosono/
專長/研究領域 系統規劃,機電整合與系統最佳化,複合型控制,綠色能源系統,智慧型載具,客製化設計與製造
 

畢業學校國別主修學門學位修業期間
國立台灣工業技術學院台灣電機工程系工學士1990 / 09 ~ 1992 / 06
東北大學日本電氣.通信研究所工學碩士1995 / 04 ~ 1997 / 03
東北大學日本電氣.通信研究所工學博士1997 / 04 ~ 2000 / 03

服務機關部門 / 系所職稱服務期間
台北市政府工務局幫工程司1992 / 09 ~ 1995 / 03
東北大學電氣.通信研究所助理教授2000 / 04 ~ 2001 / 01
國立台北科技大學車輛系助理教授2001 / 02 ~ 2006 / 01
國立台北科技大學車輛系副教授2006 / 02~ 2006 / 07
國立台南大學機電系統工程研究所副教授2006/08~2011/07

著作
名稱Advances in Energy Equipment Science and Engineering
年度2015
類別專書
摘要The design of water-cooling condensers is a typical nonlinear and Multi-Input Multi- Output (MIMO) problem. In order to find out the manufacturing parameters to realize the optimal performance of this condenser, Taguchi’s optimization and inverse-model technology are integrated in this paper. First, the Taguchi method is used to determine the minimum required times of the experiment and the important factors which affect the out performance of most of this condenser. Next, the Adaptive Neuro-Fuzzy Inference System (ANFIS), being widely used to model different kinds of nonlinear systems, is further extended to a MIMO-ANFIS (MANFIS) architecture to train the inverse model for this condenser. Since the well-trained model has been characterized with the unique ability of figuring out the inverse relationship of each input–output set, the manufacturing parameters can be found. A case study involving statistical characterization and multiple criteria optimization on the design of a water-cooling condenser is successfully presented to confirm the effectiveness of the proposed method.
關鍵字water-cooling condenser, Taguchi’s method, MIMO-ANFIS (MANFIS)
名稱Advances in Energy Equipment Science and Engineering
年度2015
類別專書
摘要The design of water-cooling condensers is a typical nonlinear and Multi-Input Multi- Output (MIMO) problem. In order to find out the manufacturing parameters to realize the optimal performance of this condenser, Taguchi’s optimization and inverse-model technology are integrated in this paper. First, the Taguchi method is used to determine the minimum required times of the experiment and the important factors which affect the out performance of most of this condenser. Next, the Adaptive Neuro-Fuzzy Inference System (ANFIS), being widely used to model different kinds of nonlinear systems, is further extended to a MIMO-ANFIS (MANFIS) architecture to train the inverse model for this condenser. Since the well-trained model has been characterized with the unique ability of figuring out the inverse relationship of each input–output set, the manufacturing parameters can be found. A case study involving statistical characterization and multiple criteria optimization on the design of a water-cooling condenser is successfully presented to confirm the effectiveness of the proposed method.
關鍵字water-cooling condenser, Taguchi’s method, MIMO-ANFIS (MANFIS)
名稱C.N. Huang*, “Feature Analysis of Power Flows Based on the Allocations of Phase-Shifting Transformers” IEEE Transactions on Power Systems, Vol. 18, No. 1, pp. 266-272, Feb. 2003.
年度2003
類別期刊論文
摘要
關鍵字
名稱C.N. Huang*, “Autonomous Dispersed Control to Energy Storage Facilities for the Enhancement of System Stability” Journal of National Taipei University of Technology,vol. 37-1, pp. 233-242, Mar. 2004. (92-2213-E-027-046)
年度2004
類別期刊論文
摘要
關鍵字
名稱C.N. Huang*, “A Novel Sensorless-Drive Method to SRM by Impressing Pulse-Voltage on a Single Phase” Journal of National Taipei University of Technology, Vol. 37-1, pp. 243-254, Mar. 2004.
年度2004
類別期刊論文
摘要
關鍵字
名稱B.C. Chen*, Y.Y. Wu, Y.D. Huang, C.N. Huang, “Modeling and Control of Hybrid Electric Motorcycle with Direct-Driven Wheel Motor” SAE Transactions Journal of Engines, ISBN Number: 0-7680-1369-0, sp-1833, Mar. 2004.
年度2004
類別期刊論文
摘要
關鍵字
名稱T.C. Huang, C.N. Huang*, “Taiwan and EU Gasoline Vehicles Tailpipe Exhaust Emissions for Driving Cycle Test Research” Journal of Vehicle Engineering, spring CSAE9302004, Mar. 2005.
年度2005
類別期刊論文
摘要
關鍵字
名稱Y.C. Chang*, W.H. Chen, C.Y. Lee, C.N. Huang, "Simulated Annealing Based Optimal Chiller Loading for Saving Energy," Energy Conversion and Management, 47, pp. 2044-2058, 2006
年度2006
類別期刊論文
摘要
關鍵字
名稱C.N. Huang*, Guohong Wu, and Longyun Kang, ”Design of Auxiliary Generation System by Wind Power for Improving Vehicular Efficiency”, IEEE Transaction on Vehicular Electronics and Safety, ISBN: 1-4244-0759-1, pp.178-183, Dec. 2006.
年度2006
類別期刊論文
摘要
關鍵字
名稱C.J. Lin, C.N. Huang*, “A study on the Fuel Consumption Performance of Hybrid Electric Vehicles”, Journal of Vehicle Engineering, spring CSAE9601007, pp. 111-128, Mar. 2007.
年度2007
類別期刊論文
摘要
關鍵字
名稱K.H. Tseng*, Y.H. Hsiao, and C.N. Huang,” A Study on Diagnosis Method for Inspecting the Weak Bus of Power System,” Journal of National Taipei University of Technology, Vol. 40-2, pp. 1-11, Jun. 2007.
年度2007
類別期刊論文
摘要
關鍵字
名稱J. Lin,R.J.Lian*,C.N. Huang , W.T. Sie, “Enhanced fuzzy sliding mode controller for active suspension systems”, Mechatronics, International Journal of IFAC, ISSN: 0957-4158, Vol. 19, No. 7, pp.1178-1190, Oct. 2009.
年度2009
類別期刊論文
摘要
關鍵字
名稱C.N. Huang*, “Wind-Power Estimating Model Based on the Experimental Data in Laboratory,” Journal of Energy and Power Engineering, ISSN: 1534-8975, vol. 3, no. 9, pp. 60-66, Sep. 2009.
年度2009
類別期刊論文
摘要
關鍵字
名稱C.N. Huang*, C.C. Chang, “Determination of the Optimal Manufacturing Parameters by Inversely Modeling Basing on MANFIS: The Case of a Plastic Ball Grid Array”, International Journal of Intelligent Systems Science and Technology, vol. 1, no. 2, pp. 44-49, Dec. 2009.
年度2009
類別期刊論文
摘要
關鍵字
名稱C.N. Huang*, “The Development of Self-Balancing Controller for One-wheeled Vehicles”, Engineering, ISSN Print: 1947-3931, ISSN Online: 1947-394X, vol.2, no.4, pp.212-219, Apr. 2010.
年度2010
類別期刊論文
摘要
關鍵字
名稱David T.W. Lin*, C.N. Huang, and C.C. Chang, “The Optimization of the Heat Removal on the LED Package”, Advanced Science Letters ,vol. 4 ,no.6-7, pp. 2301-2305.
年度2011
類別期刊論文
摘要
關鍵字
名稱Optimal Parameter Design for Permanent-magnet Synchronous Generators used in the Small-scale Wind Powers
年度2011
類別期刊論文
摘要
關鍵字
名稱C.N. Huang*, M.Y. Lee, C.C. Chang,“Development of a Computer Aided Design and Manufacturing System for Customized Insoles”, IEEE Computer Graphics and Applications, vol. 31, no. 2, pp.74-79.
年度2011
類別期刊論文
摘要
關鍵字
名稱C.N. Huang* and C.C. Chang, Nov. 2011“Optimal-Parameter Determination by Inverse Model based on MANFIS: The Case of Injection Molding for PBGA”, IEEE Transactions on Control Systems Technology, vol.19, no.6, pp. 1596-1603.
年度2011
類別期刊論文
摘要This paper presents a novel method of integrating both optimization and inversely modeling methods to determine the optimal input-parameter for a multi-input multi-output (MIMO) system to realize the desired output-performance. First, the Taguchi method is employed to minimize experimental numbers and to collect experimental data representing the quality performances of a MIMO system. Next, the MANFIS is used to train the inverse model based on the data from the Taguchi experimental method. The adaptive neuro-fuzzy inference system (ANFIS) has been widely used for modeling different kinds of nonlinear systems. In this study, the method is further extended to MIMO-ANFIS (MANFIS) architecture to train the inverse model. The well-trained model has the ability of uniquely determining the inverse relationship for each input–output set. A case study involving statistical characterization and multiple criteria optimization on injection molding for plastic ball grid array (PBGA) is successfully presented to demonstrate the effectiveness of the proposed method.
關鍵字optimal parameter, multi-input multi-output (MIMO), inverse model, adaptive network based fuzzy inference system (ANFIS), Taguchi’s method, injection mold
名稱Chung-Neng Huang* and Wen-Ping Cheng, Sep. 2011, "Development of the Small-scale Wind-power System for Improving Vehicular Power Stability and Energy Efficiency", IJSE(國立台南大學理工期刊), Vol. 1, No. 2, pp. 41-48.
年度2011
類別期刊論文
摘要The common target for vehicular industry, as auto motor, ship, or aircraft, always focuses on minimum cost, lowest fuel consumption, and optimal function, but many contradictions exist and conflict with each other. So if can effectively retrieve the wind loss against on car body and transfer to useful power as turn obstruction into helping hand , then the energy efficiency of vehicle system can be promoted. In this paper, the auxiliary generation system based on wind power is proposed to improve energy efficiency and stabilize electric power supply. The effectiveness of this proposal is confirmed through the MATLAB/SIMULINK simulation studies and the comparison of logical demonstration to induce the optimal system.
關鍵字Wind-power, Vehicle, Power stability, Energy Efficiency
名稱The Optimization of the Heat Removal on the LED Package
年度2011
類別期刊論文
摘要
關鍵字
名稱R.J. Lian* and C.N. Huang, Mar. 2012, “Self-organizing Fuzzy Radial Basis Function Neural-Network Controller for Robotic Motion Control”, International Journal of Innovative Computing, Information and Control, vol.8, no.3, pp. 1955-1971.
年度2012
類別期刊論文
摘要Robotic systems are complicated, nonlinear, multiple-input multiple-output(MIMO) systems, which make the design of model-based controllers for robotic systems particularly difficult. Moreover, to achieve reasonable control performance, the dynamic coupling effects between degrees of freedom (DOFs) of the robotic systems must be over- come during the control process. Although a model-free, self-organizing fuzzy controller(SOFC) can be applied to the manipulation of complex and nonlinear systems, its pa- rameters are difficult to select appropriately, and it mainly focuses on controlling single-input single-output systems rather than MIMO systems. To address these problems, this study developed a self-organizing fuzzy radial basis function neural-network controller(SFRBFNC) for robotic systems. The SFRBFNC introduces a radial basis function neural-network into the SOFC to compensate for the dynamic coupling effects between the DOFs of the robotic system, as well as solve the problem caused by inappropriate selection of parameters in designing an SOFC. The SFRBFNC demonstrated control performance superior to the SOFC, as shown in experimental results from motion control tests of a 6-DOF robot.
關鍵字multiple-input multiple-output (MIMO) systems, radial basis function neural-
名稱C.N. Huang*, Apr. 2012, “A Novel Rolling-Motion Control based on Integrating Concise Optimizations for the 1DOF Inverted Pendulum”, Advanced Science Letters, vol. 9, pp. 348-353
年度2012
類別期刊論文
摘要The self-balancing ability is considered to be the most basic and important function for vehicles, such as airplanes, submarines, or ships etc., while an impact from outside hits on their bodies. The purpose of this study is to develop a concise rolling-motion control (RMC) to realize the desired self-balancing performance. For the design of RMC mechanism, first, the one-degree-of-freedom (1DOF) wheeled inverted pendulum (WIP) system is imaged to perform the rolling-motion nature of vehicle model. Next, through the eigen-analysis, the system stability and controllability can be evaluated. Third, in order to realize the self-balanced mechanism via a digital signal processor (DSP), the concise and realizable methods, as system pole-placement and linear quadratic regulator (LQR), are employed to replace and optimize the instable system poles. In addition, the genetic algorithm (GA) is used to determine the optimal parameters for LQR optimization. Finally, the one-wheeled inverted pendulum system is setup that successfully presents the effectiveness of the proposed method.
關鍵字Rolling Motion Control (RMC), Wheeled Inverted Pendulum (WIP), Pole-placement, LQR, GA.
名稱ACVT Fixed-speed Control for Wind-power Fluctuations
年度2012
類別期刊論文
摘要In recent years, wind power has grown rapidly all around the world. However, as the operation capacity of modern wind farms become comparable with the existed power plants, the fluctuation output of a large wind farm brings many integration challenges as the penetration level increase. For a smoother output of a large wind farm into the utility grids, a variety of energy storage or conversion strategies are proposed. Although these proposals seem to be helpful to smooth out the fluctuating output of the wind farms, all these strategies always need to rely on not only the complicated computations but also those unsure estimation methods to achieve the power compensation works. In this paper, the Adaptive Continuously Variable Transmission (ACVT) adopting to the individual wind turbine for fixed-speed control is proposed. For the ACVT, regarded as a fluctuation filter, can adapt the driving speed transmitted from wind mill to a fixed-speed. Consequently, the output voltage of the individual wind turbine can maintain in stability. The main features of the proposal are confirmed by means of numerical simulations.
關鍵字
名稱 A Study on Ultrasonic Drivers with the Functions of Short-Circuit Protection and Multi-Frequency Scanning
年度2012
類別期刊論文
摘要This paper describes the design and production of an ultrasound driver with the functions of short-circuits protection and multi-frequency scanning. Design considerations include frequency, frequency noise, output power and operating voltage, etc. To minimize cost, the circuit design deploys the modulization of the oscillator and the pre-amp, which increases interchangeability. The high output power is produced with a high efficiency bridge switching circuit combined with a series resonance and multi-frequency scanning circuit to control and improve the switching efficiency. In addition, this design includes a high speed detection circuit for constant monitoring of the high frequency output and output status, but also replaces the need for traditional designs using fuse protection. The fuse and 2-level protection system will not only increase safety for the device, the user, as well as the user environment, but also lower overall servicing and repair costs
關鍵字ultrasonic drives, complex frequency scanning, short-circuit protection
名稱Design of Active Grey-Kalman System for Vehicles in Roll Steering Control
年度2012
類別期刊論文
摘要For the flourishing development of the motor industrial technology in recent years, the improvements between driving performance and security are promoted enormously. However, most of the stability control systems for vehicles such as ESP, EBA and VDC, are always limited in those studies such as yaw, side-slip, brake system or traction controls. In this dissertation, the purpose of this study is concentrated on the users’ desires to design a roll steering controller which is based on Grey theory and Kalman filter, and similar to a continuously controlled chassis concept(Four-C, Volvo) framed in the central console. The studying approaches are first, by using the grey theory and the vehicular dynamic equations to estimate the next roll angle of the vehicle during passing one curve. Next, through combining the Kalman filter and SRL control rule, tire speed and steering wheel angle to design a fuzzy grey controller. Consequently, the controller can facilitate the driver to control the steering roll angle in dynamic way matching up with individual driving habit, and improve the driving performance and security at the same time.
關鍵字Grey theory, Kalman filter, roll angle, yaw, side-slip, traction control.
名稱Athasit Wongcharoen and Chung-Neng Huang*, Mar. 2012," A Novel Solution based on the Lattice Boltzmann Method to Fluid Flow Problems", IJSE(國立台南大學理工期刊),Vol. 2, No. 1, pp. 5-12.
年度2012
類別期刊論文
摘要The Lattice Boltzmann Method (LBM) is a modern numerical technique, very efficient, flexible to simulate different flows within complex and varying geometries. Historically, it originated from lattice gas cellular automata, which simulate the dynamics of fluid particles on a microscopic level based on the Boltzmann equation in a discrete phase space using only a small number of velocities adapted to a regular grid in space. During the last two decades, the LBM has been developed as an alternative numerical scheme for solving the incompressible Navier-Stokes equations (NS). Phase separation is an important phenomenon in fluid dynamics, which has many important industrial applications. In this paper, we study Lattice Boltzmann model in two dimensions and nine directions. D2Q9 model used to study the phase separation in fluids flow. The results of simulations show that fluids flow in the cavity and the cylinder, simulation show phase separation of single component multiphase flow can observe bubble information by LBM.
關鍵字Lattice Botzmann Method, Fluid Flow, Navier-Stokes equations
名稱Aaron Chung and Chung-Neng Huang*, Mar. 2012," A Novel Development of Speed Control for Induction Motors based on the Nonlinear System Identification", IJSE(國立台南大學理工期刊), Vol. 2, No. 1, pp. 23-30.
年度2012
類別期刊論文
摘要According to the recent studies knows that the induction motors are difficult to be simulated precisely through the equivalend circuit of a steady-state response without including a transient one. This study will explore calculation of the precise transfer function of nonlinear control and nonlinear function, which can both cope with the steady-state response performance as well as approximate the transient response. Here, the first step is to set up a methematic model based on a real system. Second, through the Nonlinear Control Desicn (NCD) to acquire the nonlinear characteristics of the mathematically and use the identified data based on the given inputs and outputs to simulate the induction motor. These approaches are helpful to design the relative controllers for back up the system stability. The nonlinear parts are explored by using the noninear function to approximate the NCD error to achieve a more precise transfer function while keeping simulation errors within an acceptable fange.
關鍵字transient response, induction motor, speed control, nonlinear-system, identification
名稱The Development of Dual-effect Fuzzy Control System based on FPGA
年度2013
類別期刊論文
摘要The water misting cooling has phase change characteristics,so the cooling efficiency is better than water cooled ,and more saveing energy, save water, less noise ,It is being widely used in the air conditioning system for the condenser cooling. In order to enhance the cooling efficiency of the water misting cooling system and improve the efficiency of the air conditioning system in the cold room, In the study use ultrasonic water misting cooling chiller for controlled object, and proposed the dual-effect fuzzy control system controller’s design concepts ,carry out the fuzzy controller and the control circuit in the FPGA chip to reach the goal of the product, After the relevant tests that is differing from traditional air-cooled water chillers. In the study, in addition to improve the shortcomings of traditional chiller energy consumption, to enhance the efficiency of water misting cooling system, achieve more saving energy and high efficiency control purposes .
關鍵字Supersonic Oscillator, Fuzzy controll, cooling, water misting
名稱A Novel Method of Transfer-Function Identification for Unknown Systems
年度2013
類別期刊論文
摘要This study proposes a new modeling method for unknown systems. Through this method, the transfer functions can be identified. First, theinput-output data pairs of the unidentified system should be collected. Then, the transfer function’s coefficients can be identifiedbased on the errors viathe derivative-free search methods such as GA etc. Here, a second-order transfer function is used in this study. For a second-order transfer function is difficult to approach each system, a plurality of transfer functions may be used depending on the precise requirement. Finally, following the previous steps, the other transfer function can be found in succession. In order to confirm the effectiveness of this proposed method, an electromagnetic flywheel (EF) system is used in this study. Such kinds of systems are always with manyuncertainties as nonlinear electromechanical coupling and electromagnetic saturation, etc. They are difficult to modeling via traditional mathematic ways. In this study, the data pairs of EF system is collected by experiments. By assessing the results of the proposaland experimental data shows that this method is feasible to any unknown systems.
關鍵字
名稱Bifurcation and chaos analysis of atomic force microscope system
年度2013
類別期刊論文
摘要Atomic force microscope (AFM) is a very high-resolution type of scanning probe microscope, which is an essential characterization and actuation tool in modern nanoscience or engineering. This paper investigates the bifurcation and chaos behavior of the probe tip from AFM system by the differential transformation method (DTM). The dynamic behavior of the probe tip is characterized by reference to bifurcation diagrams, phase portraits, power spectra, Poincare’ maps and maximum Lyapunov exponent plots produced using the time-series data obtained from DTM. The results indicate that the probe tip behavior is significantly dependent on the magnitude of the vibrational amplitude. Specifically, the probe tip motion changes from T-periodic to 3T-periodic, then from 2T-periodic to multiperiodic, and finally to chaotic motion with windows of periodic motion as the vibrational amplitude is increased from 0 to 2.0. Furthermore, it is demonstrated that the DTM is in good agreement for the considered system.
關鍵字Atomic force microscope, Bifurcation, chaos analysis
名稱Development of A Self-balancing Cooling System based on Harvesting Heat via Stirling Engine
年度2013
類別期刊論文
摘要Most of days, the summer temperature in Taiwan is higher than 30 degree Celsius. Where, heat dissipation for devices becomes more difficult and needs more electric power. In addition, devices discharging waste heat via traditional ways that accelerates global warming. In order to serve above problems, a self-balanced cooling system is developed. Based on Stirling engine, waste heat is recycled and transformed into a kinetic power. In this paper, this power is used to relieve heat via a fan by devices themselves. Besides, for higher heat input yields larger power to drive a fan and vice versa to Stirling engine, a self-cooling cycle naturally forms under above autonomous control. The feasibility assessment will be confirmed via simulation studies.
關鍵字Self-balancing system, Stirling Engine, Autonomous Control
名稱Development of An Novel Adaptive Suspension System based on Ball-screw Mechanism
年度2013
類別期刊論文
摘要For the passive and semi-active suspensions are characterized as with constant parameters which cannot cope with time-variant road conditions, the suspension results are difficult to be satisfied. Although, the active ones are better than previous two on suspension performance, until now which are still far from real application for the drawbacks of complicated structure, large volume, costly, and difficult maintenance. Here, Ball Screw (BS) is with the characteristics of smaller volume, precise positioning, and well handling high-speed forward and backward transmissions. Instead of hydraulic or pneumatic mechanisms used for vehicle suspension, BS is adopted to be the main body of the proposed New Adaptive Suspension System (NASS). Besides, in order to overcome the unavoidable time-delay resulted from mechanical or computational operations, the Kalman filter, integrated with suspension controller, is used to estimate the road conditions. The effectiveness and feasibility of this proposal are confirmed through simulation studies.
關鍵字Adaptive Suspension, Ball Screw, Kalman Filter.
名稱A Novel Solution for Fluid Flow Problems based on the Lattice Boltzmann Method
年度2014
類別期刊論文
摘要Recently, phase separation and fluid flow problems have been an important phenomenon in fluid dynamics, which has many important industrial applications. Lattice Boltzmann method (LBM) is the numerical method to explain the behaviour of fluid dynamics in mesoscopic scale single-component single-phase and multi-component multiphase flows. In this paper, we study the lattice Boltzmann models in two dimensions(2D)with nine directions(Q9), that is the D2Q9 model was used to study the phase separation and observe that the phenomenon of fluid flow in a cylinder has obstacle and square cavity. The simulation results show that fluid flow in the square cavity and fluid flow in the cylinder, simulation show phase separation of single-component multiphase fluid flow can observe to bubble information occur by the LBM.
關鍵字fluid flow problems; lattice Boltzmann method; Navier–Stokes equations
名稱An Intelligent Design to the PID Controller for Nonlinear System (Article first published online: 28 NOV 2014 http://onlinelibrary.wiley.com/doi/10.1002/asjc.1074/full)
年度2014
類別期刊論文
摘要The proportional integral derivative (PID) controller is the most frequently used controller design for indus-trial applications because of its favorable response and simplicity of adjustment. However, PID manual tuning is traditionally based on engineering experience, and adjusting nonlinear or unknown systems is extremely difficult. In promoting an intelligent controller design theory that can be applied to the control of various sys-tems, this paper proposes a nonlinear control design (NCD) method that involves determining the optimal solu-tion and obtaining the transfer function of an unknown system by using sequential quadratic programming (SQP). In addition, this paper presents a case study of an induction motor V/F speed control to demonstrate the effectiveness of the proposed method based on MATLAB simulation. The results prove that the design of the proposed intelligent PID controller is more robust than traditional controller designs.
關鍵字Motor-speed control, nonlinear control design (NCD), proportional integral derivative (PID) controller, radial basis function neural network (RBFNN), sequential quadratic programming (SQP).
名稱Experimental investigation on heat transfer and pressure drop of ZnO/ethylene glycol-water nanofluids in transition
年度2015
類別期刊論文
摘要Light emitting diodes (LEDs) have many advantages, including a low power consumption, a long lifetime and a small size. However, at temperatures greater than 120 °C, a significant deterioration of the lamp body and packaging materials occurs. As a result, effective thermal management schemes are essential in maintaining the performance and reliability of high-power LED modules. One of the most common forms of LED cooling system is a heat sink consisting of an array of vertical fins designed in such a way as to optimize the heat dissipation efficiency through conduction, convection and radiation effects. In practice, the efficiency of such systems is largely dependent on the thermal conductivity of the fin material. Accordingly, the present study performs a numerical investigation into the cooling efficiency of a heat sink consisting of aluminum-graphite pin fins under ambient temperature conditions of 35 °C, 70 °C and 80 °C and natural convection air flow velocities of 0.5 ms−1, 2 ms−1 and 4 ms−1. The simulations assume the pin fins to be fabricated of aluminum-graphite composite material with graphite contents ranging from 0 to 90 vol.%. In general, the results confirm the effectiveness of graphite addition in improving the heat transfer performance of passive aluminum pin fin heat sinks. It is found that for all values of the ambient temperature and convection air flow velocity, the heat transfer performance improves as the graphite addition is increased from 0 to 60 vol.%. However, at higher values of the graphite concentration, only a minor further improvement in the heat transfer rate is obtained. Thus, it is inferred that a graphite content of 60 vol.% represents the optimal design for the present aluminum-graphite pin fins
關鍵字LED, Heat sink, Pin fins, Aluminum-graphite composite material
名稱Integration of Taguchis Method and Multiple-Input Multiple-Output ANFIS Inverse Model for the Optimal Design of a Water-Cooled Condenser
年度2016
類別期刊論文
摘要The design of water-cooled condensers is a typical nonlinear and multiple-input, multiple-output (MIMO) problem; to achieve optimal performance, Taguchi’s method and inverse-model technology were integrated, and a simulation platform developed by using the COMSOL Multiphysics software was used. First, the minimum number of experiments required to represent the full-factorial design and the most critical factors affecting product performance were determined by using Taguchi’s method. Next, the adaptive neuro-fuzzy inference system (ANFIS) was extended to an MIMO–ANFIS architecture and used to train an inverse model for realizing the desired design. By using a well-trained model that can determine the inverse relationship of each input–output set, the manufacturing parameters for the optimal performance were obtained. A simulation study on a water-cooled condenser is presented to demonstrate the effectiveness of the proposed method.
關鍵字Multiple-input, multiple-output (MIMO), Adaptive-network-based fuzzy inference system (ANFIS), Taguchi’s method, Inverse model, Water-cooled condenser
名稱Design of a Flywheel Control for Fuel Cell Vehicles
年度2016
類別期刊論文
摘要This paper proposes a novel powertrain with a magnetic flywheel to compensate the fuel-cell output for electric vehicle (EV). This design is to maintain the fuel cell output in constant preventing from polarization loss occurring in violent driving. The simulation results show that this design can effectively support the fuel cell to meet the EV power demand and level up the fuel cell efficiency on a better performance.
關鍵字magnetic flywheel, fuel cell, hybrid powertrain, fuzzy control, system stability
名稱Design of an Intelligent Vehicle Control Based on the Center of Gravity of Pilot
年度2016
類別期刊論文
摘要Steering wheels and joysticks are the most familiar tools for vehicular operations so far. However, they may become difficult to meet some special demands as driving in a narrow-and-small capsule or in rapid-responding steering etc. used in entertainment or military. In this paper, based on the signals of center of gravity (COG) from the driver’s seat, a novel vehicular control method is proposed and developed. In this study, a tricycle system with two front wheels and one rear wheel (2F/1R), is designed and set up to simulate the conventional steering mechanism in ships or airplanes. The system setup mainly includes a wheel motor, a dc motor and a pilot’s seat. They are designed to be a main mover, a steering driver and controller, respectively. In addition, the slope angles of the pilot’s seat detected by tilts are used as the displacement signals. In this study, the mean absolute percentage error between simulation and experimental studies is smaller than 1.05%. The effectiveness of this proposed design is confirmed.
關鍵字vehicle control, center of gravity, tricycle, fuzzy control, system stability
名稱C.N. Huang*, "The optimal allocation pattern of phase shifting transformers for unwinding parallel flows", Transmission and Distribution Conference and Exhibition 2002: Asia Pacific. IEEE/PES, Print ISBN: 0-7803-7525-4, vol. 1, pp. 68-73.
年度2002
類別研討會
摘要
關鍵字
名稱Autonomous Control of Dispersed Energy Storage Devices for Stability Enhancement of Power System
年度2003
類別研討會
摘要 
關鍵字 
名稱為改善車輛行控安全與穩定性之動力控制系統
年度2003
類別研討會
摘要 
關鍵字 
名稱A New Sensorless Drive Method of Switched Reluctance Motors by Impressing Pulse Voltages
年度2003
類別研討會
摘要 
關鍵字 
名稱C.N. Huang*,"Preventive Flow Control for Transient Stability by Phase Shifting Transformers",Transmission and Distribution Conference and Exposition, 2003 IEEE PES, Print ISBN: 0-7803-8110-6,vol.2, pp.677-682.
年度2003
類別研討會
摘要
關鍵字
名稱Determination of Optimal Allocation for TCSCs by Consideration of System Stability
年度2004
類別研討會
摘要 
關鍵字 
名稱高級柴油中添加生化酵素之燃料對直噴式柴油引擎性能及廢氣排放影響之研究
年度2004
類別研討會
摘要 
關鍵字 
名稱Experimental Confirmation of the Intelligent Sensorless Drive Method for Switched Reluctance Motors
年度2004
類別研討會
摘要 
關鍵字 
名稱C.N. Huang*,"Determining Optimal Allocation of Flow Controllers Based on System Stability and Controllability", Power Systems Conference and Exposition, 2004. IEEE PES, Print ISBN: 0-7803-8718-X, vol. 1, pp. 467-472.
年度2004
類別研討會
摘要
關鍵字
名稱C.N. Huang*,“Introduction of perturbing power filter to vehicle generation system for stabilizing electric power supply ,” Proceeding of 2005 IEEE International Conference on Vehicular Electronics and Safety, Print ISBN: 0-7803-9435-6, pp.199-204. (NSC 94-2213-E-027 -053 -)
年度2005
類別研討會
摘要
關鍵字
名稱 A Hierarchical Screened Method for the Optimal Allocation of TCSCs,
年度2005
類別研討會
摘要 
關鍵字 
名稱APQP管理模式结合PLM系统在製造業應用之研究
年度2005
類別研討會
摘要 
關鍵字 
名稱以穩定車輛電源電壓為目的之主動式無段變速系統
年度2005
類別研討會
摘要 
關鍵字 
名稱以提升能源效率並穩定車輛電力為目的之風力發電系統
年度2005
類別研討會
摘要 
關鍵字 
名稱C.N. Huang*,"Power System Diagnosis for the Optimal FACTS Allocation", The International Conference on Electrical Engineering, Proceedings, No. 002-000225 Jul. 9-13, 2006 (NSC94-2213-E-027 -053 -)
年度2006
類別研討會
摘要
關鍵字
名稱C.N. Huang*,"Design of Auxiliary Generation System by Wind Power for Improving Vehicular Efficiency",IEEE Conference on Vehicular Electronics and Safety, ISBN: 1-4244-0759-1, pp.178-183.
年度2006
類別研討會
摘要
關鍵字
名稱電力系統危弱匯流排診斷法-以台電345kV輸電網路為例
年度2006
類別研討會
摘要 
關鍵字 
名稱以改善電力系統暫態穩定度為目的之TCSC最佳配置
年度2006
類別研討會
摘要 
關鍵字 
名稱Load Modeling for the Study on Dynamic Performance of Shunt Fault in Taipower System
年度2006
類別研討會
摘要 
關鍵字 
名稱以改善車輛過彎轉向不穩定性為目的之主動式側傾補償器
年度2006
類別研討會
摘要 
關鍵字 
名稱C.N. Huang*,"Study on Advanced Wind Power Systems by Application of EDLC Energy Storage System", The International Conference on Electrical Engineering, Proceedings, ICEE-064, Jul. 8-12, 2007.
年度2007
類別研討會
摘要
關鍵字
名稱小型風力發電機葉片成型製作最佳化之研究
年度2007
類別研討會
摘要 
關鍵字 
名稱自適應網路模糊推論系統應用於塑膠射出成型製程參數最適化之研究
年度2008
類別研討會
摘要 
關鍵字 
名稱Determination of Optimal Manufacturing Parameters for Injection Mold by Inverse Model Basing on MANFIS
年度2009
類別研討會
摘要 
關鍵字 
名稱C.N. Huang*,"A Study on Developing Platform for Electric Unicycles",The International Conference on Electrical Engineering, Proceedings, Paper No.:I9FP0579
年度2009
類別研討會
摘要
關鍵字
名稱"A study of Isolated Operation and Stability Control of a Microgrid System Supplying Different Power Quality Loads",IEEJ-EIT Joint Symposium on Advanced Technology in Power Systems
年度2009
類別研討會
摘要
關鍵字
名稱Wind-Power Estimating Model Based on the Experimental Data in Laboratory
年度2009
類別研討會
摘要
關鍵字
名稱Inverse estimation of temperature boundary on the gas tank
年度2009
類別研討會
摘要
關鍵字
名稱C.N. Huang*,“Autonomous control of energy storage devices for enhancing power system stability”, Power Systems Conference and Exposition,Print ISBN: 978-1-4244-3810- 5, pp.1-6
年度2009
類別研討會
摘要
關鍵字
名稱“Renewable energy distributed power system with wind power and biogas generator”, Transmission & Distribution Conference & Exposition: Asia and Pacific, 2009 , Print ISBN: 978-1-4244- 5230-9, pp.1 - 6
年度2009
類別研討會
摘要
關鍵字
名稱“Simulation of biogas generation”, Transmission & Distribution Conference & Exposition: Asia and Pacific, 2009 , Print ISBN: 978-1-4244-5230-9, pp. 1 - 5
年度2009
類別研討會
摘要
關鍵字
名稱The optimal design process of the plate heat exchanger
年度2010
類別研討會
摘要
關鍵字
名稱The Optimal Design Process of the Plate Heat Exchanger
年度2010
類別研討會
摘要
關鍵字
名稱The Heat Transfer Analysis of The Hyperbaric Oxygen Chamber with Cooling System
年度2011
類別研討會
摘要Abstract—The overheated problem is the important issue in the operation of the hyperbaric oxygen chamber. A cooling system is applied to reduce the temperature of the hyperbaric oxygen chamber. We present the finite element method to build three types cooling system for solving the overheated phenomena in this problem. For achieving the better cooling way, this investigation considers different types of cooling channel and pressure of the chamber in this simulated process. These simulated results show that the proposed method is accurate, stable, and efficient for handling the heat transfer problems. We expect that the proposed study can apply to ameliorate the overheated problem effectively.
關鍵字Hyperbaric Oxygen Chamber, Overheat problem, Cooling System
名稱A Novel Cooling System based on the Jet Impingement for UV Printing
年度2012
類別研討會
摘要This study is to design and develop a novel cooling system for the needs of the UV printing industries. From now to then, there are two ways to cool down papers which are after UV printing. One is extending production line, so that natural cooling; the other is directly set the production line in air-conditioned room, fixed at room temperature to cool down the paper. However, the disadvantages of the two methods are existed. Extending production line can get natural cooling, but the production rate would be down and also time costly. On the other hand, it can get rapid cooling in air-conditioned room, though it is consuming energy. In order to figure out the method which can make the substrate cool down significantly in the short time, a lot of researches concerning with heat dissipation issues are surveyed in this study. Here, the Jet Impingement Cooling is acknowledged as the best method than others. In this study, a novel cooling system is designed and setup based on the concept of Jet Impingement Cooling. First, in order to evaluate the effectiveness of heat dissipation and find out the optimal parameters of the proposed system, the algorithm combined finite element method with the Taguchi’s method is developed. Next, by using above results, a real cooling system would be built for the physical experiment. Finally, the comparisons between simulation and experimental results are made for confirming the effectiveness of the proposed system.
關鍵字jet impingement cooling, UV printing, finite element method, Taguchi’s method
名稱適應性網路模糊推論系統之電磁飛輪儲能系統模型
年度2012
類別研討會
摘要不同於傳統上機械式可變慣性飛輪,電磁式飛輪乃是經由控制激磁電流來調整飛輪轉速並達到動能儲存之目的,其相較於機械式的慣性控制,不僅可減小飛輪體積/重量、操作簡單,更能平滑的調整飛輪轉速與精確的控制儲存能量。但是由於此系統存在著許多非線性機電耦合或電磁飽和等不確定因數,不容易以傳統的數學方式來精確建模,導致其在設計與應用上受到限制。為此、本研究首先建立一實機量測平台來進行參數量測以取得飛輪系統之輸入與輸出關係後,再透過適應性網路模糊推論系統來建立其非線性模型。此模型將有助於往後電磁式飛輪的應用與發展。
關鍵字電磁式飛輪、適應性網路模糊推論系統、動能儲存、非線性系統
名稱Development of Nonlinear Control Design for an Intelligent PID Controller
年度2012
類別研討會
摘要For controller design in the industrial com-munity, PID controller is the most popular one, which can achieve good response after some adjustments due to its simplicity. However, in the past, adjustments were handled manually according to experience and it is extremely diffi-cult to adjust nonlinear or unknown systems. This study puts forward an intelligent controller design theory that can be applied to control of various systems. First, through NCD (Nonlinear Control Design) to find the optimal solu-tion and obtain the transfer function of the unknown system by using SQP (sequential quadratic programming) method. Next, use the induction motor V/F speed control as a case study to confirm the effectiveness of above the proposed method viaMATLAB simulation. The results prove that the design of the intelligent PID controller proposed in this paper has a better robustness than the traditional ones.
關鍵字PID controller, NCD, SQP, RBFNN, motor-speed control.
名稱The study of the performance of the acetone and aluminum flat plate heat pipe (Paper ID: ICARMAEC-2013-476)
年度2013
類別研討會
摘要The flat plate heat pipe (FPHP) made of aluminum with a copper-coated surface, for filling acetone, is investigated by experiment. Performance indicators, such as temperature uniformity, thermal resistance and maximum heat transport are measured on the varying filling amounts of working fluid. After 2000 h of compatibility test, the results show that the generated rate of non-condensable gas (NCG) for a 1.4 g filling amount is larger than the one of 1.7 g. After that, The NCG exhausted process is operated after this 2000 h, then continued for an additional 2000 h compatibility test. Finally, it can proof that the FPHP is available under the compatibility between the aluminum and acetone.
關鍵字Flat Plate Heat pipe, Aluminum, Non-condensable gas
名稱主動式懸吊系統之研究
年度2013
類別研討會
摘要本研究提出一新型主動式懸吊系統,以精密機械工業常使用的滾珠螺桿來代替一般車用懸吊用的結構及主動式懸吊中的油壓或氣壓式系統結構,使用滾珠螺桿主動式懸吊來針對其螺帽滑件承載受一路面干擾的位移變化,並透過工業界常使用的PID控制器來做為控制器的主體,模擬實驗測試懸吊系統的路面抑制性能來做可行性評估,其結果有補償過度的情形發生,研究對輸入路面的外來震動干擾以卡爾曼濾波器來進行估測以輔助改善此問題。本研究主動式懸吊系統在路面抑止上與作動速度能與測試路面干擾作作配合,並透過模擬實驗來驗證。
關鍵字
名稱The Electromechanical Behavior of a Micro-Beam Driven by Traveling Electrostatic Force
年度2014
類別研討會
摘要There is no literature mentioning the electromechanical behavior of a micro-beam, one of the common microstructure in micro devices, driven by traveling electrostatic forces. This paper is to present the dynamics and stabilities of a micro-beam on which an electrostatic force travels to and fro. The traveling electrostatic force may be induced by a row of actuated electrodes which are arranged beneath the micro-beam and actuated sequentially. The linearized distributed model considering the electromechanical coupling effect between electrostatic force and structure is derived based on the small deflection assumption. According to the analytical results, the micro-beam will resonate when the traveling speeds of the electrostatic force approach some critical speeds. The critical speeds are equal to the ratio of the natural frequencies to the wave number of the correlative natural mode of the micro-beam. Besides, the micro-beam may be unstable at some traveling speeds differing from the critical speeds. Furthermore the unstable regions expand with increasing driving voltage. This article may lead to a new research branch on electrostatic-driven micro devices.
關鍵字electrostatics, MEMS, microstructures, stabilities
名稱Design of a water-cooling condenser based on the integration of Taguchi’s method and MANFIS
年度2015
類別研討會
摘要The design of water-cooling condensers is a typical nonlinear and Multi-Input Multi- Output (MIMO) problem. In order to find out the manufacturing parameters to realize the optimal performance of this condenser, Taguchi’s optimization and inverse-model technology are integrated in this paper. First, the Taguchi method is used to determine the minimum required times of the experiment and the important factors which affect the out performance of most of this condenser. Next, the Adaptive Neuro-Fuzzy Inference System (ANFIS), being widely used to model different kinds of nonlinear systems, is further extended to a MIMO-ANFIS (MANFIS) architecture to train the inverse model for this condenser. Since the well-trained model has been characterized with the unique ability of figuring out the inverse relationship of each input–output set, the manufacturing parameters can be found. A case study involving statistical characterization and multiple criteria optimization on the design of a water-cooling condenser is successfully presented to confirm the effectiveness of the proposed method.
關鍵字water-cooling condenser, Multi-Input Multi-Output (MIMO), Adaptive Neuro-Fuzzy Inference System (ANFIS), MIMO-ANFIS (MANFIS)